📦 Full Description:

SIKA SANITARY SEALANT WHITE 300ML is a premium-grade silicone sealant specifically formulated for sanitary applications in areas exposed to moisture. Ideal for use around bathtubs, showers, sinks, and toilets, it provides a durable, waterproof seal that resists mildew, mold, and bacteria growth, ensuring a hygienic and clean environment. Its white color blends well with ceramic fixtures and tiles, making it a perfect choice for modern bathrooms and kitchens. The sealant is easy to apply, offering excellent adhesion to tiles, glass, ceramics, and plastic. Once cured, it remains flexible and long-lasting, effectively preventing water ingress and potential damage to walls and floors.

⭐ Key Features:

• Mildew-resistant formula to prevent mold and bacteria growth

• Waterproof and weatherproof for use in wet environments

• Excellent adhesion to tiles, ceramics, glass, plastics, and most building materials

• Flexible and durable for long-lasting seals

• White color matches ceramic fixtures and tiles

• Ideal for sealing around bathtubs, showers, sinks, and toilets

• Easy to apply with a smooth finish

• Non-toxic and safe for use in domestic environments

• Non-corrosive and safe for contact with most common materials

• Cures to a flexible finish that accommodates slight joint movements

📊 Technical Specifications:

• Type: Silicone-based sealant

• Size: 300ml cartridge

• Color: White

• Skinning Time: Approximately 10-15 minutes

• Curing Time: Fully cured in 24 hours (depending on environmental conditions and joint depth)

• Shore A Hardness: 20–25

• Elasticity: Excellent (up to 25% joint movement accommodation)

• Temperature Resistance: -40°C to +120°C (continuous)

• Application Temperature: +5°C to +40°C

• Shelf Life: 12 months (unopened in cool, dry conditions)

• VOC Content: Low VOC, compliant with European regulations

🛠️ Ideal For:

• Sealing around bathtubs, showers, sinks, and toilets in wet areas

• Kitchens and bathrooms to prevent water damage and mold growth

• Sealing tiles, glass, and ceramic surfaces exposed to moisture

• Joint sealing in areas subject to frequent water exposure

• Sealing in domestic and commercial sanitary installations

• Sealing gaps and joints in plumbing and sanitary installations

🧪 Instructions for Use:

1. Surface Preparation: Clean and dry the surfaces to remove any dust, grease, or loose debris. For best adhesion, lightly roughen non-porous surfaces such as glass or plastic.

2. Application: Cut the tip of the cartridge to the desired bead size and load into a caulking gun. Apply the sealant evenly into the joint or gap, ensuring full contact with both surfaces.

3. Tooling: Smooth the applied sealant with a dampened tool or finger to achieve a clean and uniform finish.

4. Curing: Allow the sealant to cure for 24 hours for full hardness. The sealant skins over in about 10–15 minutes but requires full curing time.

5. Clean-up: Clean any excess sealant with a damp cloth before it cures. Once cured, the sealant can only be removed mechanically.